 |
REVOLVING CLAMP |
CLAMP
The revolving clamp is characterised by a fixed and a moving part.
The former has a fixing function, while the latter is able to clamp and, thanks to the guiding cradle, to revolve threaded cylindrical parts.
These clamps make it possible to work effortlessly because they are built with the following precautions: The parts with the function of guiding the sliding are tempered. They can be greased in any point desired.Double fifth wheel. The unscrewing part can be divided from the screwing part. All the components are interchangeable.
The cylinder that performs the rotation by approximately 30° of the upper clamp can be installed (as indicated in the picture below) |
 |
 |
Zoom |
|
|
|
|
ø25-ø135 |
ø50-ø200-P |
ø50-ø250 LIGHT |
ø50-ø280 |
ø60-ø360 LIGHT |
ø60-ø420 |
ø80-ø600 |
Driving torque |
from 0 up to 250 kgm |
from 0 up to 400 kgm |
from 0 up to 400 kgm |
from 400 up to 800 kgm |
from 600 up to 2000 kgm |
to 1800 kgm |
to 2200 kgm |
Clamping force |
|
9620 kg |
4600 kg |
21200 kg |
25650 kg |
38485 kg |
33660 kg |
Breaking torque |
|
2700 kgm |
1470 kgm |
4870 kgm |
9280 kgm |
19140 kgm |
19838 kgm |
Working pressure |
|
250 bar |
120 bar |
270 bar |
270 bar |
250 bar |
220 bar |
Weight |
|
215 kg |
236 kg |
470 kg |
750 kg |
2000 kg |
3240 kg |
|
ø25-ø135 |
ø50-ø200-P |
ø50-ø250 LIGHT |
ø50-ø280 |
 |
| Zoom |
|
 |
| Zoom |
|
 |
| Zoom |
|
|
|
| Zoom |
|
|
to the right of the mast as well, or applying 2 cylinders whereby one applies the pulling and the other the pushing force, in order to achieve a perfect rotation guide and consequently ease of disassembly or screwing packs of rods.
A complete clamp with just the unscrewing part or just the underneath part that performs the screwing can be used in the machine.
The multifunctional clamp, completely tempered on the sliding points, can work in an individual way or it can be applied to drilling machines, in order to screw or unscrew threaded cylindrical parts. |
|
SEPARATE |
SEPARATE
The two parts making up the clamp are also designed to work independently from one another, so you can request only the part performing the tightening or only the part that performs the unscrewing |
|
|
CLAMP BENCH |
CLAMP BENCH
Workbench comprising a 50-280 clamp that facilitates clamping and unclamping of threaded cylindrical parts used by mechanical workshops and by those needing to perform maintenance work on bottom hammers. |
|
|
|
